Friday, August 29, 2014

Fwd: Green Power Network: Renewable Energy RFPs

---------- Forwarded message ----------
From: DOE Green Power Network <eere@service.govdelivery.com>
Date: Fri, Aug 29, 2014 at 8:55 AM
Subject: Green Power Network: Renewable Energy RFPs
To: iammejtm@gmail.com

U.S. Department of Energy, Energy Efficiency and Renewable Energy, The Green Power Network

Renewable Energy RFPs

This update contains solicitations for renewable energy generation, renewable energy certificates, and green power as a courtesy to our subscribers. Unless otherwise noted, these requests for proposals and solicitations are neither supported nor endorsed by the U.S. Department of Energy, Green Power Network.

Deadline - September 11, 2014

Solarize Harrisonburg RFP seeking a single price/kW installed for a group of residential homeowners in Harrisonburg, Virginia. This price will be offered to all homeowners participating in the group. The PV projects are to be installed on the roofs of each of the properties and will be owned by the individual property owners.
Contact: Aaron Sutch

Deadline - September 12, 2014

The City of Georgetown, Texas and Georgetown Utilities (GUS) RFP seeking up to 150 MW of solar energy from companies qualified and experienced in the development, generation and dispatch of electricity produced in the ERCOT Transmission System. GUS expects to purchase the energy and associated environmental attributes/renewable energy certificates from qualified solar facilities for a term of up to twenty-five years beginning no later than December 31, 2016. The deadline for RFI is August 29, 2014.
Contact: Neil McAndrews Ph: 512-707-0649 Cell: 512-415-3227

Deadline - October 3, 2014

South Carolina Electric & Gas Company RFP seeking bidders to provide solar power to the utility through purchased power agreements. SCE&G intends to work with solar developers to locate the solar farms on company-owned property in North Charleston (up to 500 kW) and Cayce (up to 4 MW).
Contact: SCEGSolarRFP@scana.com

Deadline - October 20, 2014

El Paso Electric RFP seeking soliciting turnkey proposals for the engineering, procurement, and construction of two utility-scale solar energy generating facilities having a combined maximum capacity up to 25 MW on an alternating current. The two projects will be built on land provided by EPE at separate and different locations.
Contact: Julie Bañuelos Fax: 915-543-4073

A complete list of active RFPs can found on our Financial Opportunities page.

Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page. You will need to use your e-mail address to log in. If you have questions or problems with the subscription service, please contact support@govdelivery.com.

This service is provided to you at no charge by DOE's Office of Energy Efficiency & Renewable Energy (EERE). Visit the Web site at http://www.eere.energy.gov.

This email was sent to iammejtm@gmail.com on behalf of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy · 1000 Independence Ave., SW · Washington DC 20585

--
Jeremy Tobias Matthews

No comments:

Custom Quality Promise

Riding Of The Practical Knowledge Through The Moves Done Up Ahead; Up River In The Visualization Of River Boarder Moves Being Done. One Should Fit The Shape That's Going To Steer Through The Rapids Accurately In Order To Make The Sport Safer And Better. It Is True That This Sport Is Beyond All Of Us Inspiring All Of Us River Boarders To Champion The Charge Up River In The Uplifting Of The Human Spirit, Therefore To Instance Such Self Reliance In Action By Shaping And Self Propelling In Roaring Rapids That Are Deep Enough Where The Rider's Wise Enough To Navigate With Some Custom Steering Edges By A River Boarder Capable Of Eyeing The Spot To Ride In. The Set Up Should Also Be Customized For Each Spot The Rider Is Going To Ride In. Any One Size Fits All Is Inaccurate When Dealing With Multiple Gaps Of A Set Of Rapids With Skimming Spaces On Either Side Wherefore Knowing Where All Of The Rocks Are At Is As Important As Is Where To Mix And Match The Handle System, The Board And Set Up To Fit What Gap In The Rapids You Want To Start From In The Ride Up River. All Shapes Are Available In Foam Composite Or Wood, Just Tell Me Which Shape As Well As Color Of Edges, Background, What Creature and Color Of It.

Thank You.

Safety Guidelines And Liability Release

1. Do Not Attach Rope Or Board To Yourself

2. Do Not Attach Metal To Board Or Set Up

3. Be Alert And Give Right Of Way To River Traffic

4. Do Not Leave Board Unattended In Water

5. Do Not Detach Set Up From Shore With Board In Water

6. Do Not Attach Set Up To Branches Of Trees

JTM RAPID BOARDS Warrants That They Are Not Liable And May Not Be Sued Against The Law For Personal Injury Caused By The Misrepresentation Of The Abilities To Have What It Takes To Handle This Sport, Nor Will They Be Blamed For Any Environmental Damages An Inexperienced Rider May Cause To His Or Her Own Board Or Set Up.

Knowledge Empowerment And Coaching

Here's What We Are Talking Here As Far One On One Lessons Being Procured For Sound Judgement Of River Safety And High End Athletic Display To Get To A Professional Level Of River Boarding Where The Rider Is Doing, An Actual Repertoire Of River Boarder Moves. It Is Fully Understood That Not Everyone Grew Up Swimming In A River And Is Prepared For Anything That Can Happen On One, That's Why We Have JTM A.K.A Jeremy Tobias Matthews River Boards. A Subsidiary Of River Ruler Entertainment. A Film And Music Production Label. Wether I Am Training You To Be A Future Franchise Owner Or Just So You Can Teach Your Own Children The Rate Is $90 An Hour Happy To Be Of Service Just Set An Appointment If You Need Me. See Also River Board Group Rate Lessons In The Search Box To To See Group Rate Lessons Before Setting An Appointment.

Thank You.

Quality And Service

The Soul Of The Sport Of River Boarding Is Connecting To The Specific Rapids We Ride In Through Working With Our Hands And Our Feet And So Moving To Moving Through With The Follow Through JTM Rapid Boards Hereby Discloses That Upon Receiving An Email Request For Order Form And Going Through The Email Exchange Estimate Process The Following Will Occur: The Rider Will Get The Exact Custom Board Made By Hand That They Want Within Two Weeks After We Have Received A Check Made Out To The Shaper By Hand To Jeremy Matthews(See Contact Info).

Thank You.

Stretch Technician Services

The Art Of The Stretch System Is To Get The Stretch The Same Consistency As The Current To Ride In So The Rider Is In Balance With The River. This Is A Lot Less Strain On The Body. It Also Makes For A Smooth Even Pull Up River With No Jerks Or Sudden Stops. Since Every Riding Spot Is Different The Professional Rider Has Different Length Segments To Match Different Spots. Therefore For The Safety Of Customers The Rider Should Know How Many Gaps They Want To Charge Up Into And How Deep The Water Is. The Shop Rate For Making A Set Up Is $40 An Hour Tie Off Instructions Included With Purchase. Please Set An Appointment For Estimate.

A3 Description

A4 Description

Overall This One Is Shaped Like An Otter However This One Does Have A Tendency To Get Caught In A Dive If The Rider's Weight Is Not Kept On The Back End To Prevent The Current From Taking The Nose To The Bottom So The Rider Must Adjust When Caught In a Dive. Don't Just Let It Go. You Will Just Have To swim To The bottom To Get It Anyway. You Might As Well Adjust Right Then And There And Put Weight On The Back End Of The Board While Your Exploring Underneath The River. It Does Have A Split Tail On The Rear Which Makes For Nice Rail To Rail Banking. It Also Has The Inverted Center So You Can Carry It Under Your Arm Like A SurfBoard With The Same Length As A3.

A5 Description

One Of The Things I Love About This Shape Is The Diversity Of Tricks It Allows. A Skilled Rider Can Do Any Trick On Any Shape Granted, But Some Tricks As A Shaper Has A Certain Shape In Mind, Just Work Better For Those Tricks. That Is Why A Good Shaper Rides The Boards They Make And Visualizes The Moves They Will Do Within The Movement And Bodily Timing With The Rapids Before They Make The Shape They Ride And So This Is The One That This Rider Can Do The Most Tricks Under The Water, On The Water And Above The Water With To Begin With, And Then Once The Tricks Are Mastered They Can Be Done On Any Board. Some Boards Will Work Better For Different Body Types So Knowing Your Own Body Is The first Step And Knowing The Tricks And Spot Come Next. Trust Yourself You Will Always Do That The Best.

Friday, August 29, 2014

Fwd: Green Power Network: Renewable Energy RFPs

Renewable Energy RFPs

Deadline - September 11, 2014

Deadline - September 12, 2014

Deadline - October 3, 2014

Deadline - October 20, 2014

No comments:

Post a Comment

Reach Me On Facebook

Reach Me On Twitter